Load media
Select a paper size to continue.
To load full-size paper
1.
Raise the input tray.
2.
Lower the output tray and pull out the output tray extender.
3.
Lift the input tray shield and slide the paper-width guide to the left.
20 Chapter 4 Paper basics
ENWW
4.
Insert a stack of paper into the input tray with the short edge down and the print side up, and
slide the stack of paper down until it stops.
5.
Slide the paper-width guide to the right until it stops at the edge of paper.
To load small-size paper
1.
Raise the input tray.
2.
Lower the output tray and pull out the output tray extender.
ENWW
Load media 21
3.
Lift the input tray shield, slide the paper-width guide to the left, and then remove all paper from
the input tray.
4.
Insert a stack of photo paper with the short edge down and the print side up, and slide the stack
of paper down until it stops.
5.
Lift the input tray shield and slide the paper-width guide to the right until it stops at the edge of
paper.
To load envelopes
1.
Raise the input tray.
22 Chapter 4 Paper basics
ENWW
2.
Lower the output tray and pull out the output tray extender.
3.
Lift the input tray shield, slide the paper-width guide to the left, and then remove all paper from
the input tray.
4.
Insert one or more envelopes into far-right side of the input tray and slide the stack of envelopes
down until it stops.
The side to be printed on should face up. The flap should be on the left side and facing down.
5.
Lift the input tray shield and slide the paper-width guide to the right against the stack of
envelopes until it stops.
ENWW
Load media 23